Quick Start Guide

1. Install cartridge

• Before heading out.
• Ensure dial is in off position.

2. Charge Cap

• Tighten sleeve quickly and firmly.
• Sleeve does not need to bottom out.

3. Fill uKeg

• First, rinse with cold water.
• Fill from the bottom with fill-tube.

4. Cap uKeg

• Turn pressure up to desired setting.

5. Pour and Enjoy

• Tilt glass, hold close to the spout.
• Open tap completely, let go.

Do not open sleeve when cartridge contains pressure.

Do not use without CO2 cartridge.

Do not turn off pressure when uKeg is full. Doing this does not save CO2.

Do not store or transport uKeg on its side or shake.