Quick Clean Guide

Hand Wash Only
Remove cap and rinse uKeg with hot water
1. Remove cap and rinse uKeg with hot water (< 120° F).
  • Repeat 3 times
Rinse cap and sleeve
2. Rinse cap and sleeve with hot water (< 120° F).
Shake with tap open, facing downward
3. Shake with tap open, facing downward
  • Water may or may not come out of tap.
  • Repeat until water runs clean.
Fill with hot water and baking soda
4. Fill with warm water under 120° F and 1 cleaning tablet.*
  • Shake well.
    *Baking soda is acceptable substitute.
Install cap, charge briefly, flow a little water through tap, close tap.
5. Install cap, charge briefly, flow a little water through tap, close tap.
  • Let sit for 10 minutes.
  • Then open tap until uKeg is empty or pressure runs out.
Empty bottle and rinse all parts.
6. Empty bottle and rinse all parts.
  • Thoroughly rinse tap lock.
  • Move lock several times during rinse.
Allow to dry, and store with cap off and tap open in a dry place.
7. Allow to dry, and store with cap off and tap open in a dry place.

Tags:

guides ›